Cap and Keep Table Lamp and Tray

Item DMC-STL-000696 · Coffee, Tea & Kitchen Organization · Drop #274

Coffee, Tea & Kitchen OrganizationEstimated from $19.99STL #3423Drop #274

Ready to print this?

Choose size, material, color, finish, and quantity on the quote request.

Print This

Product information

Cap and Keep Table Lamp and Tray

A cozy little mushroom lamp that lights up your space while keeping your small essentials close. Perfect for bedside tables, desks, or anywhere you need a touch of whimsy.

Item number: DMC-STL-000696
Category: Coffee, Tea & Kitchen Organization
STL catalog #: 3423
Drop collection: Drop #274
Approx. size: Height: 22 cm (assembled files)
Print time: 09 Hours 16 Minutes
Multipart time: 09 Hours 03 Minutes
Multicolor time: 10 Hours
Nozzle: 0.4 mm
Layer height: 0.20 mm
Walls: 3 walls in almost parts, and 2 Wall only on “Mushroom_A” e “Mushroom_A Lamp Holder” files
Infill: 10% (Gyroid) and you will need to use 1% (Concentric) infill only on light “Mushroom-A” e “Mushroom_A Lamp Holder” file.
Supports: No
Plate adhesion: Yes
Hardware: a cable with a plug that is compatible with your region. You can weld the internal cables of the light or simply insulate them with electrical tape.
Material options: PLA, PETG, Matte PLA

Production notes

We use (Archimedean Chords) for finishing the top layers.
(FOR 0.4 MM NOZZLE) Line Width/ Nozzle: 0.4 mm First Layer Line Width: 0.48 mm / 120% Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) Recommended Initial Layer Height: 0.20 mm Recommended Layer Height: 0.20 mm Others: We use (Archimedean Chords) for finishing the top layers. Recommended Perimeters/ Walls: 3 walls in almost parts, and 2 Wall only on “Mushroom_A” e “Mushroom_A Lamp Holder” files. Recommended Infill (%): 10% (Gyroid) and you will need to use 1% (Concentric) infill only on light “Mushroom-A” e “Mushroom_A Lamp Holder” file. Needs Support: No. Build Plate Adhesion: Yes. (Brim) only in the smallest parts with low bed adhesion. Others: For small part use a 0.08 mm profile for better finishing.

Order options

Request this print as-is or ask for custom sizing, colors, finish, quantity, or themed paint work.

Print This More in This Category Back to Catalog

Matched set

Headphone, Phone & Controller Stands Drop #274 Collection

This item belongs to the same STLFlix drop as these related pieces. Many drops are designed as collections, companion displays, scenes, game accessories, or themed sets.

View Full Drop